[Clayart] Placing a thermal mass too close to a thermocouple

David Woodin via Clayart clayart at lists.clayartworld.com
Tue Oct 6 15:02:32 EDT 2015


Hi Arnold,
On the second test was the kiln held for 30 minutes at 1700 and were
readings of the two thermocouples taken during the 1700 deg F hold?
David

On Tue, Oct 6, 2015 at 9:42 AM, Arnold Howard via Clayart <
clayart at lists.clayartworld.com> wrote:

> Last week I experimented with placing a post 1/8" from a thermocouple to
> find out how much that would affect the accuracy of the temperature
> readings. This required two test firings with a kiln that had two test
> thermocouples. My results:
>
> http://www.paragonweb.com/Kiln_Pointer.cfm?PID=462
>
> Sincerely,
>
> Arnold Howard
> Paragon Industries, L.P., Mesquite, Texas USA
> ahoward at paragonweb.com / www.paragonweb.com
>
> MAILMAN_MIMEDEFANG WRAP
> _______________________________________________
> Clayart mailing list
> Clayart at lists.clayartworld.com
> http://lists.clayartworld.com/cgi-bin/mailman/listinfo/clayart
>
> MAILMAN_MIMEDEFANG
>



More information about the Clayart mailing list