[Clayart] Kiln wash Flaking - help

David Lyons lyonsd at plbb.us
Sat Jul 16 21:36:54 EDT 2016


My kiln wash lasts longer after I began to use a 3 inch paint roller to apply. When I run out of the commercial kiln wash I'll use the recipe that Bill gave in the post prior to this one. I've already calcined the EPK. 
Dave Lyons 

Sent from my iPhone

> On Jul 14, 2016, at 8:57 AM, William Schran via Clayart <clayart at lists.clayartworld.com> wrote:
> 
> Dan, What is in your current wash recipe?
> We used: Alumina Hydrate - 50, EPK - 25, Calcined kaolin - 25 with good
> results.
> 
> Bill
> 
> Bill Schran
> www.creativecreekartisans.com
> wschran at cox.net
> 
> 
> 
> On 7/13/16, 9:55 PM, "Clayart on behalf of Dan Saultman via Clayart"
> <clayart-bounces at lists.clayartworld.com on behalf of
> clayart at lists.clayartworld.com> wrote:
> 
>> Hi,
>> My current kiln wash is too flaky and comes off easily. Making a mess
>> and jeopardizing my pots.
>> Does anyone have a reliable kilnwash that adheres properly?
>> 
>> Thanks
>> 
>> Dan
>> 
>> Fine Art Pottery for Home & Office
>> Saultman Design, Inc.
>> Clinton Twp. MI 48035
>> email: design at saultman.com
>> 
>> 
>> 
>> _______________________________________________
>> Clayart mailing list
>> Clayart at lists.clayartworld.com
>> http://lists.clayartworld.com/mailman/listinfo/clayart
> 
> 
> 
> _______________________________________________
> Clayart mailing list
> Clayart at lists.clayartworld.com
> http://lists.clayartworld.com/mailman/listinfo/clayart
> 





More information about the Clayart mailing list