[Clayart] Final glaze question"promise"

M Gordon clayart at earthlink.net
Sat Oct 8 13:41:14 EDT 2016


Ken.
  Are these glazes that run clear off the pot from the top, middle,  or  
the bottom of the pot? try using a glaze that you know doesn't run &  
use it for the bottom 1/3 of the pot. Mike Gordon
On Oct 8, 2016, at 7:58 AM, Ken Chase wrote:

> I 'm aware most of my questions are naive and
> Far below the standards of other posts I read.
> I appreciate all the feed back I've received and
> Need to ask one more question.
> I'm finally getting the result I've been striving for
> Getting two or three different commercial glazes
> To flow together for a cascading effect.
> Now I have to deal with glaze running down
> Past the foot ring. A great solution was suggested that I make  
> pedestals. I plan to do so.
> I have been using catch plates and protecting
> My shelves. I bought stilts a long time ago but
> Never used them.
> In obsessing over this glaze on the foot ring
> Problem it occurred to me maybe I should use
> Stilts between the catch plate and the pot.
> Then if the glaze ran over the foot ring it wouldn't
> Pool at the catch plate and allow me to
> Grind the bottom.
> Is this a good idea? Or, is there a down side
> To using stilts?
> Thanks for all the help
> Best,
> Ken
>
>
>
>
> Sent from my iPad
> -------------- next part --------------
> An HTML attachment was scrubbed...
> URL:  
> <http://lists.clayartworld.com/pipermail/clayart/attachments/20161008/ 
> 6b8b3ca9/attachment.html>
>




More information about the Clayart mailing list