[Clayart] I give up

Tommy Humphries tommyhumphries at sbcglobal.net
Mon Oct 17 00:33:20 EDT 2016


When the cones and kiln are at the same temperature, the cones become "invisible". I always just cut back on the gas a second, and the change in temp would make the cons stand out.

Tommy Humphries


Sent from my iPad

> On Oct 16, 2016, at 6:00 PM, Deborah Thuman <debthuman at zianet.com> wrote:
> 
> Maybe giving up is what I should have done in the first place. 
> 
> After much swearing, gnashing of teeth, and snarling, I finally figured out how to fire the kiln more or less even. But…. I can’t see the #)%*)@%@ cones no matter what I do. Tried the mag light. Didn’t work, but I have a good flashlight in my car. Tried the hairdryer. Didn’t work. Tried coating a slab of clay with red iron oxide and put that behind the cones. Didn’t work. 
> 
> So.. this time, I gave up. I have a probe in the bottom peep and the top peep so I can tell how fast I’m firing. Yesterday, I gave up. I aimed for the middle of the temp range for ^04. The bottom only got to ^06, the rest of the kiln got to ^04. So… I’ll keep putting cones in the kiln so  I can see what I did, but I’m giving up on trying to see the cones while I’m firing. 
> 
> No, I don’t know what the problem is. I never had a problem seeing the cones in the gas kiln at the university. 
> 
> Deb Thuman
> debthuman at zianet.com <mailto:debthuman at zianet.com>
> https://debthumanblog.wordpress.com <https://debthumanblog.wordpress.com/>
> 
> 
> You can’t have a light without a dark to stick it in. 
> Arlo Guthrie
> 
> 
> 
> 
> 
> -------------- next part --------------
> An HTML attachment was scrubbed...
> URL: <http://lists.clayartworld.com/pipermail/clayart/attachments/20161016/7df6708e/attachment.html>
> 




More information about the Clayart mailing list