[Clayart] I give up
dianamp at comcast.net
dianamp at comcast.net
Mon Oct 17 11:12:00 EDT 2016
How far into the kiln are you placing the cones?
----- Original Message -----
From: "Paul Gerhold" <gerholdclay at gmail.com>
To: "Clayart international pottery discussion forum" <clayart at lists.clayartworld.com>
Sent: Monday, October 17, 2016 7:53:04 AM
Subject: Re: [Clayart] I give up
There are Maglites and then there are Maglites. They come with LED and with incandescent bulbs and depending on the size of the flashlite the lumen output varies greatly. The one I have uses the LED type bulb and uses three batteries and has about a six hundred plus lumen output. At cone 6 this will make the cones perfectly visible. That said cone placement does matter and mine are about 4 inches from the inside of the kiln wall. Imam also electric although not sure if that should make a difference.
That said it is an expensive flashlight but I have had mine for years and have never had a problem.
Sent from my iPad
> On Oct 16, 2016, at 7:00 PM, Deborah Thuman <debthuman at zianet.com> wrote:
> Maybe giving up is what I should have done in the first place.
> After much swearing, gnashing of teeth, and snarling, I finally figured out how to fire the kiln more or less even. But…. I can’t see the #)%*)@%@ cones no matter what I do. Tried the mag light. Didn’t work, but I have a good flashlight in my car. Tried the hairdryer. Didn’t work. Tried coating a slab of clay with red iron oxide and put that behind the cones. Didn’t work.
> So.. this time, I gave up. I have a probe in the bottom peep and the top peep so I can tell how fast I’m firing. Yesterday, I gave up. I aimed for the middle of the temp range for ^04. The bottom only got to ^06, the rest of the kiln got to ^04. So… I’ll keep putting cones in the kiln so I can see what I did, but I’m giving up on trying to see the cones while I’m firing.
> No, I don’t know what the problem is. I never had a problem seeing the cones in the gas kiln at the university.
> Deb Thuman
> debthuman at zianet.com <mailto:debthuman at zianet.com>
> https://debthumanblog.wordpress.com <https://debthumanblog.wordpress.com/>
> You can’t have a light without a dark to stick it in.
> Arlo Guthrie
> -------------- next part --------------
> An HTML attachment was scrubbed...
> URL: <http://lists.clayartworld.com/pipermail/clayart/attachments/20161016/7df6708e/attachment.html>
-------------- next part --------------
An HTML attachment was scrubbed...
More information about the Clayart