[Clayart] Throughing thinner?

ran mcc ranmcc at msn.com
Wed Oct 26 22:13:51 EDT 2016


Guess it was just a thought. Been making pottery for 40 years.  No training.  No mentors.  Pretty isolated from the clay community except for clay art.



Sent from my Verizon Wireless 4G LTE smartphone


-------- Original message --------
From: Vince Pitelka
Date:10/26/2016 9:06 PM (GMT-05:00)
To: 'Clayart international pottery discussion forum'
Subject: Re: [Clayart] Throughing thinner?

Hi Randy -
I am curious as to why you would want to lighten them up more.  "Too light" is a real problem in functional ceramics.  Unless this is a conceptual project to produce non-functional "bowls," the weight in your bowls serves an important purpose.
- Vince

Vince Pitelka
Appalachian Center for Craft
Tennessee Tech University
vpitelka at dtccom.net
https://sites.tntech.edu/wpitelka/




-----Original Message-----
From: Clayart [mailto:clayart-bounces at lists.clayartworld.com] On Behalf Of ran mcc
Sent: Wednesday, October 26, 2016 11:19 AM
To: ClayArt <clayart at lists.clayartworld.com>
Subject: [Clayart] Throughing thinner?

I like to throw 12lb bowls that usually will reach to 18 to 19 inches.  Using Red Stone from Carolina Clay.  12lb bowls will fire out to about 7lbs with glaze.  I would like to get these bowls lighter in final weight.  I know I can make sure the bottom is minimum thickness,  I know I can trim as much as possible.  I just don't want to get warped bowls.  Are there some techniques you can share to get pieces as thin and light as possible without causing warping in the fire?  Suggestions on maybe a better clay that will hold up better to thin throwing without warping?  Any other suggestions?  Thanks for any help.


Randy
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.clayartworld.com/pipermail/clayart/attachments/20161026/486168ca/attachment.html>



-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.clayartworld.com/pipermail/clayart/attachments/20161027/5c7dc144/attachment.html>


More information about the Clayart mailing list