[Clayart] Torchbearer conversion to propane

[Vince Pitelka]

Hi Jim - 
That was careless advice from Olympic.  Call Marc Ward at Ward Burner Systems.  He can help you.
- Vinde

Vince Pitelka
Appalachian Center for Craft
Tennessee Tech University
vpitelka at dtccom.net  
https://sites.tntech.edu/wpitelka/
 


-----Original Message-----
From: Clayart [mailto:clayart-bounces at lists.clayartworld.com] On Behalf Of jim stone
Sent: Thursday, February 9, 2017 11:36 AM
To: clayart at lists.clayartworld.com
Subject: [Clayart] Torchbearer conversion to propane

I have an old Torchbearer NG kiln I am trying to convert to propane.  I am having trouble sourcing the "orifice plug".  I've checked with Ward, they sent me to Olympic and they said I just needed to go to any "propane place".  I checked with my local and the small appliance place that converts stoves etc., and struck out.  

Any help would be appreciated. jim "bonsai" stone seki bonsai santa fe, tx (409) 795-8671
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://lists.clayartworld.com/pipermail/clayart/attachments/20170209/46d33c90/attachment.html>