[Clayart] Glazing the bottom of the pot

Vince Pitelka vpitelka at dtccom.net
Tue Jan 3 18:45:50 EST 2017


In my experience, glazed feet are just as likely to scratch a countertop as unglazed feet that have been properly finished.  I like to go over them with an abrasive flap wheel on a bench grinder or motor arbor.  
- Vince

Vince Pitelka
Appalachian Center for Craft
Tennessee Tech University
vpitelka at dtccom.net  
https://sites.tntech.edu/wpitelka/
 


-----Original Message-----
From: Clayart [mailto:clayart-bounces at lists.clayartworld.com] On Behalf Of Deborah Thuman
Sent: Tuesday, January 3, 2017 1:55 PM
To: via Clayart <clayart at lists.clayartworld.com>; Kenneth Chase <kchase235 at gmail.com>
Subject: [Clayart] Glazing the bottom of the pot

In the past, I’ve glazed the feet of a piece and then put either a chunk of fire brick or a small post under the piece. The critical part is to make sure the glaze doesn’t touch the brick or post. I have Corian counter tops and don’t want the counter tops scratched. Glazed feet are a good way to avoid that. 

Deborah Thuman
debthuman at zianet.com <mailto:debthuman at zianet.com> https://debthumanblog.wordpress.com <https://debthumanblog.wordpress.com/>

"Don’t let anyone keep you down for silly reasons such as who you are.”
Dr. Vera Rubin

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://lists.clayartworld.com/pipermail/clayart/attachments/20170103/25f1eab9/attachment.html>






More information about the Clayart mailing list