[Clayart] Mouth Sprayers
zalt57 at videotron.ca
Wed Aug 8 10:00:20 EDT 2018
There are three parts to a mouth sprayer. The blow tube, the interior spray outlet tube and the container. If you have ever blown across the opening of a beer bottle to make a sound, the blow tube must be set so the when you blow into it, the air passes over the spray outlet tube mouth in similar fashion. Also check to see that the tubes are not blocked. This is done by placing your finger between the two tube openings and blowing. You should hear bubbling in the container. Your glaze may also be too thick.
Sent from Mail for Windows 10
From: Jacqueline Miller
Sent: Wednesday, August 8, 2018 8:21 AM
To: Clayart international pottery discussion forum
Subject: [Clayart] Mouth Sprayers
Mike, I have two mouth sprayers. Can’t get either to spray. Any idea what I might be doing wrong?
Sent from my iPad
> On Aug 5, 2018, at 10:29 PM, M Gordon <clayart at earthlink.net> wrote:
> I dip everything!! Spray some oxides, I use a mouth sprayer. Old timer. Mike Gordon
>> On Aug 7, 2018, at 3:10 PM, John Rodgers wrote:
>> I never spray mugs. Just dip. I may be missing out, but thats my way!
>>> On Tue, Aug 7, 2018, 17:03 Helen Stone <helenestonepeony at gmail.com> wrote:
>>> Hi folks, have you found that this Chicago Electric HVLP sprayer sprays in
>>> a small enough radius to glaze mugs, or is it just good for , say,
>>> pitchers, plates, etc?
>>> Helen in southern Ecuador
>>> -------------- next part --------------
>>> An HTML attachment was scrubbed...
>>> URL: <
>> -------------- next part --------------
>> An HTML attachment was scrubbed...
>> URL: <https://lists.clayartworld.com/pipermail/clayart/attachments/20180807/c9e8feff/attachment.html>
-------------- next part --------------
An HTML attachment was scrubbed...
More information about the Clayart