[Clayart] cutting shelves

Jim Brown jbrown1000 at gmail.com
Fri Aug 2 14:11:19 EDT 2019

Kathi, I cut Advancer shelves, much harder that the nitride bonded.
Ideally, a wet tile saw does the job but you will need a good diamond
blade.  Anything less you can forget about and the Advancer's go through
blades fairly quickly - just a few shelves per blade.  For just a few cuts,
you might be able to get away with a skill saw but if not wet - which you
would not want to use with a skill saw - you will eat blades.  Should be a
place around that might cut them for you at a price less that good diamond
blades.  People that cut head stones comes to mind.

*                                    JIM BROWN*

*                             BROWN POTTERS*

*                  "Making handmade pottery . . . *

*                                                                  . . .
since the 1700's" *
*                        Don't call yourself a pilot until you have made*
*                  a night landing, in bad weather, on a WWll class carrier*
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://lists.clayartworld.com/pipermail/clayart/attachments/20190802/c01fb232/attachment.html>

More information about the Clayart mailing list