[Clayart] Electrical technical

[Taylor Hendrix]

David W,

The snakes and whatnot was of course a nod to one of our cantankerous
clayers from way back. Years have past since he has laced this good earth
with his bones, so I have decided to raise him, as it were,  if not in body
at least in attitude.

Pax,

Taylor, near Jeddo TX
wirerabbit1 on Skype (-0600 UTC)
https://www.facebook.com/Wirerabbit.Pottery/
<http://wirerabbit.blogspot.com>
http://wirerabbitpots.blogspot.com
http://www.flickr.com/photos/wirerabbit/
https://youtube.com/thewirerabbit


On Fri, Aug 30, 2019 at 6:52 AM David Woof <woofpots at hotmail.com> wrote:

> Hi Taylor,
> Tell us more about the "whatnot" and FYI; usually snakes come after the
> liquor and then the "whatnot" is no longer an issue or a distraction.
>
> Taylor sez: " Electricians my ass. Those of you who have done your own,
> piss off.
> Those
>  of you who have not, be awed.
>
>  Snakes, liquor, and whatnot,
> Taylor"
>
> Woof loves u........
>
> ###################################################################################
>
> ________________________________
> From: Clayart <clayart-bounces at lists.clayartworld.com> on behalf of
> wschran at twc.com <wschran at twc.com>
> Sent: Wednesday, August 28, 2019 6:12 AM
> To: 'Clayart international pottery discussion forum' <
> clayart at lists.clayartworld.com>
> Subject: Re: [Clayart] Electrical technical
>
> Every thing I've read from every kiln manufacturer specifies only
> using copper wire for kilns.Is this aluminum you write about the
> conduit to run electric lines through or the wiring for the kiln?
>
> Bill
>
> William Schran wschran at twc.com 703-505-1617
>
>         -----------------------------------------From: "Taylor Hendrix"
> To: "Clayart posting"
> Cc:
> Sent: Tuesday August 27 2019 6:39:15PM
> Subject: [Clayart] Electrical technical
>
> I have just run in-ground feeders to the panel in my new studio space.
> 4
>  inch conduit, 250 KCL aluminum stuff. Stiff as (figure that one out.)
> No
>  electrician. None. Me. Me. Me. Couldn't afford it otherwise. Already
> have
>  two 20A circuits, ac unit, and a light working great.
>
>  Electricians my ass. Those of you who have done your own, piss off.
> Those
>  of you who have not, be awed.
>
>  Snakes, liquor, and whatnot,
>
>  Taylor
>  -------------- next part --------------
>  An HTML attachment was scrubbed...
>  URL:
> -------------- next part --------------
> An HTML attachment was scrubbed...
> URL: <
> https://lists.clayartworld.com/pipermail/clayart/attachments/20190828/34ff9c89/attachment.html
> >
> -------------- next part --------------
> An HTML attachment was scrubbed...
> URL: <
> https://lists.clayartworld.com/pipermail/clayart/attachments/20190830/8733c6d8/attachment.html
> >
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://lists.clayartworld.com/pipermail/clayart/attachments/20190830/5922b77f/attachment.html>