[Clayart] Hot wax
magnolia.mud.list at gmail.com
Mon Jul 15 11:53:28 EDT 2019
I have used a hot glue gun to make decorative stamps. Don't know if the
polyethylene (that is the material in the glue) will repel glaze enough to
meet your needs, but you can produce thick lines that sticks to almost any
On Mon, Jul 15, 2019 at 5:51 AM Paul Gerhold <gerholdclay at gmail.com> wrote:
> My problem is the glaze is clay based and has to be very thick to do what
> I want to achieve. Thin resists just coat over after a couple of coats of
> glaze. Can actually clan with moist Q tips but way to much work to be a
> viable technique. Need a way to get a thick resist layer that dries at a
> reasonable rate.
-------------- next part --------------
An HTML attachment was scrubbed...
More information about the Clayart