[Clayart] bisque firing (story)my kiln

Kathy Schultz K1claylady at aol.com
Sun Jul 28 09:46:17 EDT 2019


Thanks for your suggestion about checking the breaker box for a loose connection.
I have had many successful firings using these breakers, but you never know.

Sent from my iPad

> On Jul 27, 2019, at 4:22 PM, Snail Scott <claywork at flying-snail.com> wrote:
> 
> 
>> On Jul 26, 2019, at 2:24 PM, Kathy Schultz <K1claylady at aol.com> wrote:
>> What I would like to know is what you all think about going ahead with glazing and firing these pots to cone 5 since they did not reach cone 05?
> 
> 
> I have some clay that would be happy with this, but some clays will have serious glaze flaws if only bisque fired to 08. So, it depends on your clay body. As a personal rule of thumb: the grayer the clay, the higher the bisque required.
> 
>          -Snail
> 



More information about the Clayart mailing list