[Clayart] mel's kiln firing after storm

William Schran wschran at twc.com
Sun Apr 17 13:26:16 UTC 2022

Use liquid soap or body wash with warm water but must clean before
latex hardens in brush. Have also read of folks using Isopropyl
Myristate to clean latex from brushes.

William Schranwschran at twc.com703-505-1617

	-----------------------------------------From: "sumi" 
To: clayart at lists.clayartworld.com
Sent: Saturday April 16 2022 9:13:21PM
Subject: Re: [Clayart] mel's kiln firing after storm


 Once it has dried in your brush it's probably hopeless. I always dip
 brush in soap, or run it across a bar of soap, before dipping it in
 liquid latex, and repeat frequently during use.

 > More mundane pottery problem: I use Liquid Latex, ammonia based,
 > masking. I find it does a good job and although more expensive than
 > resist gives me latitude for playing with glaze layering and
pattern design.
 > The problem is that it sure messes up my brushes. Has anyone
discovered a
 > way to get the stuff out of brushes?
 > thanks, ginger in the anza borrego desert
 > On Fri, Apr 15, 2022 at 4:51 PM mel jacobson  wrote:
 >> Re-fire of kiln after a storm ruined my firing two days ago.
 >> Nice today, cold, no wind to speak of.
 >> The goddess fairy of kilns sprinkled gold dust in my hair.
 >> Kiln fired in under 5 hours to cone 8 just over, no reduction
 >> back pressure at all. Did about two hours of pre/fire with a tiny
 >> burner just to make sure the re/fires are warm before the main
 >> go on. So, we will see if the glazes are lovely.
 >> Thanks for listening, as I am sort of a newby and need support.
 >> Love to all, and may you be blessed at this wonderful spring
 >> A perfect Easter for me would be Church in this tiny community,
 >> attend a perfect Seder dinner and get to ask the "questions".
 >> I have listened hundreds of nights in Dubai to the call for
prayer. It is
 >> Amazing. Respect is a wonderful concept.
 >> Mel Jacobson/owner and moderator of Clayart/ 23 years in a row. 87
 >> old.
 >> I waited in line to get Windows 95. I ordered the companion 23
 >> with a boot drive as number 1. (they stopped that really fast.)
 >> We never cut off honest discussion. We all dislike pushing a
 >> agenda on clayart, or someone that is loaded at 2 a.m.
 >> And please respect that I have to read every post, every post sent
 >> clayart. You get to zap any post or poster you do not care for.
 >> website: www.melpots.com
 >> www.melpots.com/CLAYART.HTML
 > -------------- next part --------------
 > An HTML attachment was scrubbed...
 > URL: 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://lists.clayartworld.com/pipermail/clayart/attachments/20220417/19b3302c/attachment.htm>

More information about the Clayart mailing list