[Clayart] Offgassing bisque

paul gerhold gerholdclay at gmail.com
Sat Jan 29 19:07:07 UTC 2022


I would look at what chemicals are used to color the bisque. Maybe some decompose at low enough temp that just the friction heating would cause decomposition to occur.

Paul

Sent from my iPad

> On Jan 29, 2022, at 12:40 PM, Robert Harris <robertgharris at gmail.com> wrote:
> 
> Pretty much the only likely chemical reactions are ones that give off CO2.
> 
> Something like a bicarbonate reaction with acid  Not saying that's what it
> is, just more likely. See if the gas puts out a match. You could see if
> adding a bit of vinegar speeds up the evolution of the gas.
> 
> Only other possibilities, both fairly farfetched would be hydrogen (match
> wil light it - stand back) or hydrogen sulfide (which would be really
> obvious).
> 
> Robert
> 
> 
>> On Fri, Jan 28, 2022, 08:44 Bryan Johnson <bryj at cheqnet.net> wrote:
>> 
>> When I tumble polish bisqued colored porcelain jewelry I need to "burp" the
>> barrels after an hour or so due to the gas given off by the porcelain. What
>> is the gas?
>> It doesn't happen after high fire.
>> Bryan
>> -------------- next part --------------
>> An HTML attachment was scrubbed...
>> URL: <
>> https://lists.clayartworld.com/pipermail/clayart/attachments/20220128/04187aaf/attachment.htm
>>> 
>> 
> -------------- next part --------------
> An HTML attachment was scrubbed...
> URL: <https://lists.clayartworld.com/pipermail/clayart/attachments/20220129/5eb48cd7/attachment.htm>


More information about the Clayart mailing list