it will require replumbing to do this
turn the tanks over and use liquid supply to the burners
this was Paul Soldner's suggestion when i was faced with similar propane freezing issues.

On Tue, Apr 26, 2022 at 12:59 PM Rob M <> wrote:
I recently acquired a 13 cubic feet updraft kiln. It has 8 MR750 Venturi
burners that initially ran on natural gas. I'm replacing the orifice size
for propane.
I'm clueless as to how much gas this will consume for cone 6 or ideally
cone 10.
Does anyone have experience or knowledge if two 100 pound cylinders linked
together would be adequate, without freezing up with this puppy?
Seems to be a shortage of 250 pound tanks in this area (central FL).
I did read efficiency drops on a greater psi of the gas for these burners.
So I would like to keep it low. 1 psi was 77,000 plus btu’s per burner.
Thank you for the discussion.
Followed the email list in the 90’s and beyond, even stopped in the NCECA
room cup exchange one year…

From Zen and the Art of Motorcycle Maintenance
"You see things vacationing on a motorcycle in a way that is completely
different from any other. In a car you're always in a compartment, and
because you're used to it you don't realize that through that car window
everything you see is just more TV. You're a passive observer and it is all
moving by you boringly in a frame. On a cycle the frame is gone. You're
completely in contact with it all. Your in the scene, not just watching it
anymore, and the sense of presence is overwhelming. That concrete whizzing
by five inches below your foot is the real thing, the same stuff you walk
on, it's right there, so blurred you cant't focus on it, yet you can put
your foot down and touch it anytime, and the whole thing, the whole
experience, is never removed from immediate consciousness."
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <>